Manuals / TRENDnet / Computer Equipment / Network Card

TRENDnet TEW-603PI manual Detailed Info. Screen

Models: TEW-603PI

1 44

Download 44 pages 55 Kb

Page 24

DETAILED INFO. SCREEN

AVAILABLE NETWORKS

The Available Networks pane settings are described below.

SSID	Shows the name (usually the equipment vendor's name)
	assigned to a wireless Wi-Fi network.

Mode	Shows the signal type (802.11b/g).

Strength	Shows the signal strength.

Ch	Shows the network channel.

Security	Shows the security status.

Refresh (button)	Click to refresh the list of currently available networks.

Detailed Info (button)	Click to view properties for the selected network. (See
	Detailed Info. Screen below.)
Connect (button)	Click to connect to the selected network. (The network is not
	added to the profile list.)
Add To Profile (button)	Click to add the network to the profile list.

DETAILED INFO. SCREEN

For details about any of the listed access points, select it from the list and click Detailed Info to see the following screen. (You can also double-click an access point to view the Detailed Info screen.

24

Image 24

TRENDnet TEW-603PI manual Detailed Info. Screen

Contents

Page Federal Communication Commission Interference Statement IMPORTANT NOTE FCC Radiation Exposure StatementCE Mark Warning Table of Contents Hardware and Wireless UtilityExploring the Wireless Client Utility Screens Configuring Wireless SecurityGetting Started with the TEW-603PI Hardware and Wireless Utility About Your Wireless MIMO PCI AdapterPackage Content System RequirementProduct Outline Wireless MIMO PCI AdapterSide view of the PCI Adapter from bracket Overview of the Wireless Client Utility The Network Screen The Profile Screen The SiteSurvey ScreenThe Options Screen The Version Screen Working with Profiles 1. Click Profile3. Type a descriptive name for the profile such as Home or CoffeShop 7. Click Next. The WLAN Security Configuration screen appears 9. Click Next 1. Open the Wireless Client Utility and click Profile 2. Select the profile you want to modify and click PropertiesMODIFYING PROFILES WEP Wired Equivalent Privacy WPA/WPA2 WPA-PSK/WPA2-PSKUse DHCP Use static IP belowChecking for Available Access Points Disabling the Wireless Client Utility 1. Open the Wireless Client Utility and click OptionsPage Exploring the Wireless Client Utility Screens The Network ScreenThe Network Screen The Profile Screen The SiteSurvey Screen The Options Screen The Version ScreenSecurity ” Shows the current network IP address The Profile Screen The SiteSurvey Screen DETAILED INFO. SCREEN The Options Screen The Version Screen Configuring Wireless Security Configuring Security2. Click the drop-down arrow at Security Mode and choose WEP 1. In the Properties window, click WLAN Security3. Click the Use Static WEP checkbox Select the encryption to match your access point CONFIGURING WPA & WPA2 Refer to the following to configure WPA / WPA21. Click the drop-down arrow at Security Mode and choose WPA / WPA2 CONFIGURING WPA-PSK & WPA2-PSK 4. Type in a unique User ID and Password under User Information Check this box if your network requires user certification and CONFIGURING 802.1X - EAP-TLS Glossary USER AUTHENTICATION SSIDTEMPORAL KEY INTEGRITY PROTOCOL TKIP Maintenance See “Maintenance” See “Troubleshooting”Appendix Adapter - Uninstall 3. Click Next in the Choose Destination Location screenTroubleshooting PROBLEMPROBLEM CORRECTIVE ACTIONProblems Communicating With Other Computers PROBLEMCORRECTIVE ACTION The TEW-603PIAd-Hoc IBSS Verify that the peer computers is turned on Limited Warranty OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD