Manuals / TRENDnet / Computer Equipment / Network Card

TRENDnet manual Getting Started with the TEW-603PI

Models: TEW-603PI

1 44

Download 44 pages 55 Kb

Page 5

Getting Started with the TEW-603PI

Getting Started with the TEW-603PI

Congratulations on purchasing the TEW-603PI! This manual provides information for setting up and configuring the TEW-603PI. This manual is intended for both home users and professionals. It is not required to read some of the more technical information in this manual (such as in “Wireless LAN Networking” and “Configuring Wireless Security”) to operate and enjoy the TEW-603PI. It is included for your reference only.

The following conventions are used in this manual:

THE NOTE SYMBOL INDICATES ADDITIONAL INFORMATION ON THE TOPIC AT

HAND.

NOTE

THE TIP SYMBOL INDICATES HELPFULL INFORMATION AND TIPS TO IMPROVE

YOUR NETWORK EXPERIENCE.

THE CAUTION SYMBOL ALERTS YOU TO SITUATIONS THAT MAY DEGRADE

YOUR NETWORKING EXPERIENCE OR COMPROMISE YOUR SECURITY.

LIKE NOTES AND TIPS, THE IMPORTANT SYMBOL INDICATES INFORMATION

THAT CAN IMPROVE NETWORKING. THIS INFORMATION SHOULD NOT BE OVER-

LOOKED.

5

Image 5

TRENDnet manual Getting Started with the TEW-603PI

Contents

Page IMPORTANT NOTE FCC Radiation Exposure Statement Federal Communication Commission Interference StatementCE Mark Warning Hardware and Wireless Utility Table of ContentsExploring the Wireless Client Utility Screens Configuring Wireless SecurityGetting Started with the TEW-603PI About Your Wireless MIMO PCI Adapter Hardware and Wireless UtilityPackage Content System RequirementSide view of the PCI Adapter from bracket Product OutlineWireless MIMO PCI Adapter The Options Screen The Version Screen Overview of the Wireless Client UtilityThe Network Screen The Profile Screen The SiteSurvey Screen 1. Click Profile Working with Profiles3. Type a descriptive name for the profile such as Home or CoffeShop 7. Click Next. The WLAN Security Configuration screen appears 9. Click Next MODIFYING PROFILES 1. Open the Wireless Client Utility and click Profile2. Select the profile you want to modify and click Properties WEP Wired Equivalent Privacy WPA-PSK/WPA2-PSK WPA/WPA2Use DHCP Use static IP belowChecking for Available Access Points 1. Open the Wireless Client Utility and click Options Disabling the Wireless Client UtilityPage The Network Screen Exploring the Wireless Client Utility ScreensThe Network Screen The Profile Screen The SiteSurvey Screen The Options Screen The Version ScreenSecurity ” Shows the current network IP address The Profile Screen The SiteSurvey Screen DETAILED INFO. SCREEN The Options Screen The Version Screen Configuring Security Configuring Wireless Security3. Click the Use Static WEP checkbox 2. Click the drop-down arrow at Security Mode and choose WEP1. In the Properties window, click WLAN Security Select the encryption to match your access point 1. Click the drop-down arrow at Security Mode and choose WPA / WPA2 CONFIGURING WPA & WPA2Refer to the following to configure WPA / WPA2 CONFIGURING WPA-PSK & WPA2-PSK 4. Type in a unique User ID and Password under User Information Check this box if your network requires user certification and CONFIGURING 802.1X - EAP-TLS Glossary TEMPORAL KEY INTEGRITY PROTOCOL TKIP USER AUTHENTICATIONSSID Appendix MaintenanceSee “Maintenance” See “Troubleshooting” 3. Click Next in the Choose Destination Location screen Adapter - UninstallPROBLEM TroubleshootingPROBLEM CORRECTIVE ACTIONPROBLEM Problems Communicating With Other ComputersCORRECTIVE ACTION The TEW-603PIAd-Hoc IBSS Verify that the peer computers is turned on Limited Warranty OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD