TRENDnet TEW-603PI manual CONFIGURING 802.1X - EAP-TLS

CONFIGURING 802.1X – EAP-TLS

1.At Security Mode select WPA from the drop-down menu.

2.At Authentication Protocol select TLS from the drop-down menu.

3.TLS requires both server and user certification. Click Configure Certificate (see Note below). The following window appears:

Use user certificate	Check this box if your network requires user certification and
	then select the certificate from the drop-down menu.
Validate server certificate	Check this box if your network requires server certification and
	then select the certificate authority from the drop-down menu.
Server name:	Type in the name of the server that is used for 802.1X
	authentication.

Server name should match exactly

Check this box if the server name should exactly match the name in the certificate.

4. Click OK to apply the settings.

34