GB
5.2.2 System Info.
Brief information about the unit will be provided.
In the System Setup menu, use the CH Up/Down buttons to select "7. System Info.", and then press the OK button. The following information will be provided:
zSoftware Version
zHardware Version
zFirmware Version
zLoader Version
zRelease Date
5.2.3Upgrade
Allows you to upgrade the system's channels, menus, and software.
1In the System Setup menu, use the CH Up/Down buttons to select "8. Upgrade", and then press the OK button.
2When the values become enabled, set the relevant settings. Use the CH Up/Down buttons to move between settings and use the Left/Right buttons to change the value. The following settings will be available only when you use the Red button (PC D/L) and the Green button (STB to STB).
zChannel: Upgrades the channels.
zMenu: Upgrades the menu's wallpapers.
zSoftware: Upgrades the software.
3 Press one of the color buttons to select the upgrade method.
zRed button (PC D/L): Press this to perform the upgrade using your PC. Connect the unit to your PC, and then press the Red button. Use the Left/Right buttons to select "STB to PC" or "PC to STB" and then press the OK button.
zGreen button (STB to STB): Press this to perform the upgrade using another STB. Connect the unit to another STB, and then press the Green button. Use the Left/Right buttons to select "Master" (the STB that will send files) or "Slave" (the STB that will receive files), and then press the OK button.
4To finish the upgrade, press the Exit button.
NOTE:
z CABLE PIN CONFIGURATION
5.2.4 Factory Defaults
Use this to restore all the settings to their default values.
1In the System Setup menu, use the CH Up/Down buttons to select "9. Factory Defaults", and then press the OK button.
2A warning message will be displayed. To proceed with system Reinitialization, press the OK button.
3When the password input screen appears, enter the password. System Reinitialization will be executed.
