GB

5.4.2 Transponder Edit

Transponder Edit allows you to add, edit, or delete TP information.

To edit or delete TP information

1In the Channel Manager menu, use the CH Up/Down buttons to select "2. Transponder Edit", and then press the OK button.

2When a list of TPs is displayed, use the CH Up/Down buttons to select the TP for which you want to change the setting, and then press one of the following color buttons.

zRed button (Edit): Press this to edit the selected TP. After se- lecting a TP, press the Red button. The TP information on the right side of the screen will be enabled. Use the CH Up/Down buttons to select a setting, and then use the Left/Right/Numeric buttons to change the value.

zBlue button (Delete): Press this to delete the selected TP. After selecting a TP, press the Blue button to delete the TP from the list. Select “yes or No” in message box to use the Left / Right Buttons.

3When the settings are complete, press the Store button to save the settings.

4To exit the Transponder Edit screen, press the Exit button.

To add TP information

1In the Transponder Edit screen, press the White (Subt.) button. The Edit section at the top right of the screen will be enabled.

2Use the Left/Right buttons to select "Add", and then press the OK button.

3The TP information at the bottom right of the screen will be enabled. Use the CH Up/Down buttons to select a setting, and then use the Left/Right/Numeric buttons to change the value.

4To save the TP information you just set up, press the Store button.

5.5 CAS and CI

1Press the Menu button on the remote control. The Main Menu screen will appear.

2Use the CH Up/Down buttons on the remote control to select the CAS and CI menu, and then press the OK button

5.5.1 Conax Manager (CAS)

This menu allows the user to view the information on the Smart Card and conax conditional access system such as Product Ordering, Subscription Status, Event Status,change CA PIN, Maturity Rating About Conax CA.

Product Ordering

This is reserved menu.

Subscrition Status

The user can see the current statues of the subscription entitlement in the card.

Event Status

The user can see the current statues of the Event entitlement in the card.

22 DVB C1

Page 50
Image 50
Triax DVB C1 manual CAS and CI