Tripp Lite B064-032-04-IPG Port Configuration, Access, Virtual media mounted to the selected port

OSD Operation (continued)

Access (continued)

Setting	Description
Access	The Access setting determines if an account is allowed to access the selected port, and if so, what level of access the
	account has. To edit this setting, click on the box in the Access column next to the account you wish to edit. Continue to
	click until you toggle to the desired setting.
	Full Access – This setting is represented by an icon that shows a pair of glasses and a pencil. It allows the
	corresponding account to both view video and perform operations on the selected port.
	View Only – This setting is represented by a pair of glasses only. It allows the corresponding account only to view video
	of the selected port.
	No Access – This setting is represented by an X, and denies the corresponding account access to the selected port.
Mount USB	The Mount USB setting determines if an account is allowed to access the virtual media functionality on the selected
	port, and if so, what level of access the account has. To edit this setting, click on the box in the Mount USB column next
	to the account you wish to edit. Continue to click until you toggle to the desired setting.
	Full Access – This setting is represented by an icon that shows a pair of glasses and a pencil. It allows the
	corresponding account to both read and write to virtual media mounted to the selected port.
	View Only – This setting is represented by a pair of glasses only. It allows the corresponding account only to read
	virtual media mounted to the selected port.
	No Access – This setting is represented by an X, and denies the corresponding account access to virtual media
	mounted to the selected port.
Config	The Config setting determines if an account has permission to make changes to the master KVM or port configuration
	settings. To edit this setting, click on the box in the Config column next to the account you wish to edit. Click to toggle
	Config access on/off. A check mark enables access, an X disables access. Note: Config checkboxes are provided as
	a way for Super Administrators and Administrators to customize which ports Administrators and User accounts have
	Configuration access to. In order for the Config checkbox to enable Configuration access to a port, the Administrator
	or User account must be given Port Configuration access to the KVM switch. (See Permissions in the Adding User
	Accounts section under User Management in OSD Operation for details.)

When you are done editing access rights to the selected port, click on the Save icon in the lower-right corner of the Access sub-section.

Also at the bottom of the page are Copy and Paste icons. These are used to copy the access settings from one port and paste those same settings to another port. To do this, simply highlight the port you want to copy and click on the Copy icon. Then highlight the port you want to paste to and click the Paste icon.

Port Configuration

The Port Configuration sub-section allows Super Administrators and Administrators to edit port properties settings, assign system macros to a port, and add/remove associated links. When the master KVM is highlighted and the Port Configuration sub-section is selected, the following screen appears.

The only setting that appears on this page is the Occupy Timeout setting. This setting controls the amount of inactivity time before a port that is set to Occupy (see Port Property section on the following page for details) is opened for access by another user. Enter in a value from 0 to 255 seconds. The default is 3 seconds.

When a standard port is highlighted and the Port Configuration sub- section is selected, a screen opens up that contains two sections; Port Property and Associated Link. The Port Property section is opened first by default.

24