True Manufacturing Company TAC-30 Shelving Installation / Operation, Flavor Strip Installation

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

SHELVING INSTALLATION / OPERATION

SHELF INSTALLATION:	CANTILEVER SHELVING INSTALLATION:
Step 1		Step 1
A. Hook shelf clips onto shelf standards. (see shelf Install	A. Install the shelf supports into the shelf standards
illustration).		that are located in the rear corners of the cabinet.
B. Position all four shelf clips equal in distance from the		(See photos A & B).
floor for flat shelves.
Wire shelves are oriented so that cross support bars			A
are facing down.
Step 2

Place shelves on shelf clips making sure all corners

are seated properly.
	Shelf
NOTE	Standards

Do not load product	B
to where it would
over hang the shelf.
	Shelf

Shelf

Shelf

Clip

(shelf Install Illustration)

FLAVOR STRIP INSTALLATION

FLAVOR STRIP INSTALLATION:

A.Take the shelf and turn it around. The back of the shelf should be facing out. (See image 1-2).

B.The flavor strip snaps onto the shelf with the larger opening of the strip toward the bottom. (See image 3-4).

C.After flavor strip is installed tags can be put into the flavor strip. (See image 5).

1

Turn shelf around.

2

3

4

5

Flavor strip end view	Flavor strip install.
15	www.truemfg.com	15