Tunturi T10 owner manual Basics on Exercising, Elevation

decrement, hold this button more than 2 seconds.

LED INDICATORS & DISPLAYS AND OPERATING

RANGES

The default values are PROGRAM = Manual (M), TIME = 00:00 (counting up), SPEED = 0.0, DISTANCE = 0.00 (counting up), CALORIES = 0 (counting up), PULSE = 0, and ELEVATION = 0

A. 4 LED FUNCTION INDICATORS: Indicate the function of DISTANCE, KCAL, HEART RATE AND ELEVATION.

B. 9 LED PROGRAM INDICATORS: Indicate the function of P1, P2, P3, P4, P5, P6,P7, user setting 1, and user setting 2.

C. 12 LED TRACK: Indicate the 400 Meter/0.25Mile track.

D. TIME DISPLAY: Shows the exercising time with counting up or down. While the treadmill is not running and the SAFETY KEY is on, it can be chosen by pressing “ENTER” then adjusted by pressing “+” or “-“. The range of counting up is from 00:00 to 99:59 and 10:00 to 99:00 with counting down. While counting down to 00:00, the monitor will beep 12 times then the treadmill will stop.

E. SPEED DISPLAY: Shows the speed that the treadmill is providing. It can be adjusted by pressing “SPEED+” and “SPEED- “ keys from 0.5 to 10MPH or 0.8 to 16 KPH.

F. DISTANCE, KCAL, HEART RAT AND ELEVATION DISPLAY:

The default value shown is the distance. Press Select/Scan button to display the function from DISTANCE, KCAL, HEART RATE, to

ELEVATION.

DISTANCE: Shows the distance with counting up or down. The range of counting up is from 0.00 to 999MPH/KPH and 999 to 0 MPH/KPH with counting down. While counting down to 0, the monitor will beep 12 times then the treadmill will stop.

KCAL: Shows the calories with counting up or down. The range of counting up is from 0 to 999 Kcal and 999 to 0 Kcal with counting down. While counting down to 0, the monitor will beep 12 times then the treadmill will stop.

HEART RATE: display your heart beat rate in beats per minute.

ELEVATION: Display the percentage of elevation from 0% to 12%

OPERATION INSTRUCTIONS (PLEASE READ

CAREFULLY BEFORE USING)

A. SAFETY TIPS:

To start, turn on the power and attach the Safety Key to the monitor. Notice that the machine does not work and off the LED display without the Safety Key attached. Please clip the other end of the Safety Key to the user before exercising to ensure the machine will stop in case the user accidentally runs off the treadmill. Should that happen, the Safety Key will be off the monitor and the treadmill will stop at once to avoid further injury.

O W N E R ' S M A N U A L • T 1 0

B. PROGRAMS SELECTION:

There are 9 programs including Manual, 6 preset programs, and 2 User Setting programs to choose from by pressing the SCAN SELECT key and then the “ELEVATION + – or SPEED+ –” key.

C. EXERCISING WITH A SPECIFIC GOAL:

In any programs, user may change the values of TIME before exercising. Press “ENTER” key to select each of them, and “ELEVATION + – or SPEED+ –“ to change the value. Without changing any of the values and all are 0; users can run as long as possible until it is turned off. Users may also put the desired TIME value to count down. For example, TIME is set to

10 minutes, and then the treadmill will stop after 10 minutes.

D. HEART RATE:

There are two ways to measure your heart rate. One is using the hand-pulse sensor. Another is using chest belt. The hand-pulse sensor is setting for the first priority. Please use both hands to gently hold the Hand Pulse Sensors. There are 2 sensors and 2 pieces of metal part each sensor. Each hand must gently hold both metal pieces to trigger the measuring. The heart rate will show in the “HEART RATE/ELEVATION” Display. Customer also can use chest belt to measure your pulse rate.

BASICS ON EXERCISING

ABOUT YOUR HEALTH

•Before you start any training, consult a physician to check your state of health.

•If you experience nausea, dizziness or other abnormal symptoms while exercising, stop your workout at once and consult a physician.

•To avoid muscular pain and strain, begin and end each workout by stretching.

ABOUT THE EXERCISE ENVIRONMENT

•Make sure the exercise environment has adequate ventilation. To avoid catching cold, do not exercise in a draughty place.

•Place the treadmill on a firm, level surface. Allow 120 cm or 4 feet of clearance behind the treadmill and 60 cm or 2 feet on either side and in front of the treadmill.

•We recommend that the equipment is placed on a protective base.

ABOUT USING THE EQUIPMENT

•Always unplug the treadmill from the electrical outlet after each training session.

•Only one person may use the equipment at a time.

•Keep hands clear of any moving parts. Never place hands, feet or any other objects under the treadmill.

•Wear appropriate clothing and shoes when exercising. Make sure your shoelaces are properly tied. To avoid injury and unnecessary wear on your treadmill, be sure your shoes are free of any debris

G B

5