Glossary, Continued
Glossary or Terms,
(continued)
DISTORTION – The undesired change in the waveform of a signal that can lead to diminished clarity in reception or reproduction.
ECHO – The repetition of sound by reflection of sound waves from a surface.
FIBER OPTIC RISER – An analog or digital risers that uses fiber optic distribution media. Fiber optic systems have the advantage of immunity to electrical noise and Earth faults.
FREQUENCY – The number of repetitions per unit time of a complete waveform as of an electric current.
INTELLIGIBILITY – The capability of being understood or comprehended.
INVERSE SQUARE LAW – A drop in Sound Pressure Levels (SPLs) is referred to as the “Inverse Square Law.” The law originates from the fact that as the diameter of the
NFPA – The “National Fire Protection Agency (NFPA)” is the organization responsible for several codes and guidelines related to the Fire Alarm/Protection Industry. Many of these codes are referenced and discussed in this publication.
OCTAVE – A tone that is eight full tones (diatonic degrees) above or below another given tone. (One tone has twice as many vibrations per second as the other.)
OHM’s LAW – Electrical current is directly proportional to voltage and inversely proportional to resistance I = E/R.
PHON – A unit of subjective loudness.
PHONEMES – The sounds that make up spoken words.
POLAR PLOTS – The correlation between speaker SPL and
REVERBERATION – (Also known as T60 times) is the amount of time it takes for a sound to diminish to 60 dB below the original level. Reverberation is produced when sound reflects off walls and other surfaces. What the listener hears is the direct sound from the speaker plus the reflected sound from the reverberation.
RISER – The riser is the wiring that connects the command center with the amplification equipment. There are several types of risers depending on the application: Analog, Digital, and Fiber Optic.
SENSITIVITY – The sensitivity is the amount of sound (Sound Pressure Level) produced by the speaker with a known signal frequency, power level and distance from the speaker.
SOUND PRESSURE LEVELS (SPL’s) – The level of sound pressure that is typically expressed in decibels.
STI METHOD – An intelligibility measurement method that measures the modulation transfer function for 14 modulation frequency bands spaced at
TRANSPONDER – Receives the riser from the command center, amplifies and distributes signals to the speaker circuits. The transponder also interfaces to detection equipment and other signaling circuits (strobes, deluge valves, etc.) and communicates status back to the command center.
