U-Line 2275DWRWS, 2275DWRWOL manual Initial Startup, Interior Lighting, Operation

5 Operation

ULIN_0080_A

Figure 2

IMPORTANT

Proper air flow (Figure 2) is required for your unit to operate at its highest efficiently. A grille, located in the base of the unit, must not be blocked at any time, or your unit will not perform as expected.

Initial Startup

All U-Line units are shipped with controls that are preset. No initial adjustments are required.

IMPORTANT

U-Line recommends the unit be allowed to run overnight prior to loading with product.

1 2 3 4 5

ULIN_0184_A

Figure 3

To turn the unit on or off, touch and hold the POWER icon (Figure 3, 1) on the display panel for approximately five seconds until the °F symbol flashes and release.

•A small LED above the icon will illuminate to confirm the touch of any controller icon.

•The display (Figure 3, 3) will show the unit set-point temperature when the unit is on and will show OFF when the unit is off.

•Turning the unit off will override any other control function.

Interior Lighting

The interior of the cabinet can be illuminated whenever a drawer is opened (default mode) or illuminated for a four-hour period.

The LIGHT icon (Figure 3, 5) on the control panel is used to change the lighting functions.

To illuminate the interior of the cabinet for a four-hour period:

1.Touch and release the LIGHT icon (Figure 3, 5) to switch from drawer-operated lighting control to continuous lighting (the °F symbol will flash briefly after the LIGHT icon is pressed).

2.To return to drawer-operated lighting control before the four-hour period is up, repeat Step 1.

2275DWRWS, 2275DWRWOL 7