U-Line BI2015 Product Dimensions, Door Swing/Clearances Information, Reversing the Door

Figure 4

™	BI2015 — Ice Maker

Product Dimensions

23-11/16"	25-13/16"
Including		Including
Handle		Handle
Handle		Handle

34-1/8"34-1/8"

14-15/16"		14-15/16"
14-15/16"		14-15/16"
Black and White		Stainless Steel

Figure 2

Please note that the unit has adjustable feet that can add one additional inch to height during leveling or to match adjacent cabinets (see Figure 35 on Page 14).

Door Swing/Clearances Information

Black and White units have a zero clearance for the door to open 90° (see Figure 3). Stainless Steel models require

aminimum of 2-1/8" door clearance to accommodate the handle if the unit is installed next to a wall or similar type of structure.

Wall	Wall
1/4" Min.	2-1/8" Min.
21-7/16"	21-7/16"

16-1/2"	16-1/2"
90°	90°
Door Swing	Door Swing
Black and White	Stainless Steel

Figure 3

Reversing the Door

(Black and White Units Only)

All U-Line units (except Stainless Steel models) may be left- or right-hand opening. The door opening is easily reversed by moving the hinge hardware to the opposite side. The top hinge hardware will be used on the bottom of the other side and the bottom hinge hardware will be used on the top of the other side (see Figure 4).

To reverse the door:

1. Remove top hinge screw pin from door (7/64"

Allen wrench or Phillips screwdriver, depending on your unit’s

construction) (see Figure 5). Remove door by tilting forward and lifting off bottom hinge pin.

2.Remove plastic screw plugs (3 each, top and bottom) from new hinge location. Do not discard (see Figure 6).

Screw Plugs

Figure 5

Figure 6

3.Remove top hinge (3 screws), reinstall hinge screw pin, and remount on opposite side BOTTOM (see Figure 7).

02/2005