
BI2015 — Ice Maker | ™ |
|
|
Start-Up Troubleshooting
Q: Problem
Unit does not appear to turn on when switch is set to ON.
A: Solution
Make sure unit is plugged in and outlet has power (circuit breaker has not tripped). Remember that the ice maker mechanism will not fill the mold with water until the mold reaches the proper temperature.
Q: Problem
Water does not appear to be flowing into unit.
A: Solution
Check that the water is connected and turned on and the line is not obstructed.
Q: Problem
Ice cubes produced during the first two to three hours of operation have been discarded. New cubes still appear cloudy.
A: Solution
This is normal and is caused by air being trapped in the cube during fast freezing.
IMPORTANT
See the User Manual’s Troubleshooting Guide for more solutions.
16 | 02/2005 |