Remote (PC Control) Mode
You can program and control your scanner remotely from a PC using third party software. After connecting the scanner to a PC using the Scanner to PC steps (see page 62), turn the radio off. Press and hold REMOTE key and turn the radio on. Then release the key. bc245 will flash on the display.
1.The following screen appears.
2. To control your scanner using a PC, press 
. Or, press
or 
until this screen is displayed. Then press
to select the
Remote mode.
3.Use the third party software as directed.
Start Remote Mode
Turn off the power, then turn it on again.
Press REMOTE key, until you hear two short beeps. REMOTE mode
is selected. To distinguish from Normal operation mode, “KEYLOCK” icon flashes.
During REMOTE Control mode, the scanner will ignore any key (except REMOTE key).
BANK | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
DATA
SCAN PRI
For information on purchasing third party software to program and control your BC 245XLT, see the flyer included in the box with this radio.
70
