Manuals / Brands / Communications / Cordless Telephone / Uniden / Communications / Cordless Telephone

Uniden EXAI 6980 1, 2, Turning the answering machine on and off, Setting the number of rings

1 55

Download 55 pages, 1006.78 Kb

36

Using the answering machine (continued)

1Press to change the status

from on to off. The LED display

indicates the change.

2When the unit is turned on, it

initializes by playing the greeting.

If you want to stop playing, press

.

Turning the answering machine on and off

Check the LED display to see if the answering machine is on or off. If the LED display

is on, the unit is on and ready to take messages. If the LED display is off, it will not take

messages.

2 : 2 times

4 : 4 times

TS :In the TS (toll saver) position, if you

have new messages, the

answering system answers after

two rings. If there are no new

messages, the system answers

after four rings. This way, when

you call long distance to check your

messages, and have no messages,

you can hang up after the second

ring to save a charge.

Setting the number of rings

Choose one of three settings by sliding the RING TIME switch on the base unit to

one of the following positions:

EXAI 6980 2nd HEN 10/31/00 10:06 AM Page 36

Contents

Main Introduction Features Table of contents Getting Started Basics Telephone Features Caller ID Features Step 1 Step 2 Step 3 Step 4 About the digital security code Step 1 Checking the package contents Uniden Parts Department Step 2 Setting up the base unit Choose the best location Page Step 2 Choose the dialing mode Page Step 3 Battery use time (per charge) When the battery charge becomes low Cleaning the battery contacts Page Page Page Page Page Receiving calls 1 2 3 Receiving a call from the handset Auto Talk when ringing Any key when ringing Receiving calls Page Page 4 Memory storing 5 6 7 Memory dialing Making calls with memory dialing Dialing from standby 2 1 3 Page Page Memory editing 7 8 9 Display a Programmed Number Page Page Caller ID Features When the telephone rings 1 2 Caller ID Features Viewing the Caller ID Message list 1 2 3 4 Page Page Page Page Page Page Page 1 2 Turning the answering machine on and off 2 : 2 times 4 : 4 times TS :In the TS (toll saver) position, if you Setting the number of rings Setting maximum recording time for incoming messages Page Deleting recorded messages 1 2 AT THE HANDSET AT THE BASE Page Page Page 1 2 3 4 5 6 * Page Page Page Direct wall plate mounting 1 2 8 9 Installing the beltclip To attach the beltclip To remove the beltclip Headset installation Note on power sources Battery replacement and handling RECYCLING NICKEL-CADMIUM BATTERIES Power Failure Ni-Cd Troubleshooting Page 1-800-297-1023 Index 0 - 9 A B C