Uniden EXAI 6980 *

44

Using the answering machine (continued)

1Call your telephone number.

2During the outgoing message playback, press #followed by your PIN code.

3The answering system begins announcing the time and day stamp.

4Press #then while the system announces the time and day stamp.

You hear sounds in the room where your phone is installed. After 15 seconds, the

answering system returns to the command waiting mode.

5Press #then to monitor the room for another 15 seconds. Or select another

remote function. Or hang up to exit the system. The answering system

automatically returns to standby.

Remote room monitor

You can call your answering system from any touch-tone phone and monitor sounds

in the room where your base unit is installed.

**

1Call your telephone number.

2Wait ten rings until the machine answers.

You hear a beep.

3Enter your PIN code.

The answering system begins to announce the time and day stamp.

4Press #then 6 to turn the answering system on.

5Hang up the phone and subsequent calls will be answered by the machine.

Turn on the answering machine remotely

If you have forgotten to turn on your answering machine, you can turn it on remotely

from any touch-tone telephone.

EXAI 6980 2nd HEN 10/31/00 10:06 AM Page 44

Contents

Main Introduction Features Table of contents Getting Started Basics Telephone Features Caller ID Features Step 1 Step 2 Step 3 Step 4 About the digital security code Step 1 Checking the package contents Uniden Parts Department Step 2 Setting up the base unit Choose the best location Page Step 2 Choose the dialing mode Page Step 3 Battery use time (per charge) When the battery charge becomes low Cleaning the battery contacts Page Page Page Page Page Receiving calls 1 2 3 Receiving a call from the handset Auto Talk when ringing Any key when ringing Receiving calls Page Page 4 Memory storing 5 6 7 Memory dialing Making calls with memory dialing Dialing from standby 2 1 3 Page Page Memory editing 7 8 9 Display a Programmed Number Page Page Caller ID Features When the telephone rings 1 2 Caller ID Features Viewing the Caller ID Message list 1 2 3 4 Page Page Page Page Page Page Page 1 2 Turning the answering machine on and off 2 : 2 times 4 : 4 times TS :In the TS (toll saver) position, if you Setting the number of rings Setting maximum recording time for incoming messages Page Deleting recorded messages 1 2 AT THE HANDSET AT THE BASE Page Page Page 1 2 3 4 5 6 * Page Page Page Direct wall plate mounting 1 2 8 9 Installing the beltclip To attach the beltclip To remove the beltclip Headset installation Note on power sources Battery replacement and handling RECYCLING NICKEL-CADMIUM BATTERIES Power Failure Ni-Cd Troubleshooting Page 1-800-297-1023 Index 0 - 9 A B C