Uniden EXAI 6980

1Snap the wall mount adapter into the

notches on the base.

2Plug the telephone line cord to the

TEL LINE jack and the AC adapter to

the DC IN 9V jack.

3Plug the telephone line cord into the

telephone outlet.

4Place the AC adapter cord inside the

molded wiring channel.

5Plug the AC adapter into a standard

120V AC wall outlet.

Note Use only the Uniden AC

adapter supplied with

this phone.

6Raise the antenna to a vertical

position.

7Align the mounting slots on the base.

with the mounting posts on the wall.

Push in and down until the phone is

firmly seated.

Additional information (continued)

Mounting the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

2, 3, 4,

5, 6, 7

EXAI 6980 2nd HEN 10/31/00 10:06 AM Page 47

Contents

Main Introduction Features Table of contents Getting Started Basics Telephone Features Caller ID Features Step 1 Step 2 Step 3 Step 4 About the digital security code Step 1 Checking the package contents Uniden Parts Department Step 2 Setting up the base unit Choose the best location Page Step 2 Choose the dialing mode Page Step 3 Battery use time (per charge) When the battery charge becomes low Cleaning the battery contacts Page Page Page Page Page Receiving calls 1 2 3 Receiving a call from the handset Auto Talk when ringing Any key when ringing Receiving calls Page Page 4 Memory storing 5 6 7 Memory dialing Making calls with memory dialing Dialing from standby 2 1 3 Page Page Memory editing 7 8 9 Display a Programmed Number Page Page Caller ID Features When the telephone rings 1 2 Caller ID Features Viewing the Caller ID Message list 1 2 3 4 Page Page Page Page Page Page Page 1 2 Turning the answering machine on and off 2 : 2 times 4 : 4 times TS :In the TS (toll saver) position, if you Setting the number of rings Setting maximum recording time for incoming messages Page Deleting recorded messages 1 2 AT THE HANDSET AT THE BASE Page Page Page 1 2 3 4 5 6 * Page Page Page Direct wall plate mounting 1 2 8 9 Installing the beltclip To attach the beltclip To remove the beltclip Headset installation Note on power sources Battery replacement and handling RECYCLING NICKEL-CADMIUM BATTERIES Power Failure Ni-Cd Troubleshooting Page 1-800-297-1023 Index 0 - 9 A B C