note

If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment.

If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer.

Setting up the Phone

Do the following steps:

A. Choose the best location

C. Connect the base unit

B. Install the rechargeable battery

D. Choosing the dialing mode

pack into the handset.

 

A. Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS. Here are some important guidelines you should consider:

Avoid heat sources, such as

Avoid noise sources such as a window

radiators, air ducts, and sunlight

by a street with heavy traffic

Avoid television sets and

Avoid microwave ovens

other electronic equipment

Avoid excessive moisture,

 

 

extremely low temperatures,

 

dust, mechanical vibration, or shock

Choose a central location

 

 

Avoid personal computers

 

Avoid other cordless telephones

The location should be close to both a phone jack and a continuous power outlet which is not switchable.

Keep the base and handset away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting.

Be sure there is sufficient space to raise the base antenna to a vertical position.

The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

If your second phone line has a separate modular jack, place your phone so you can access both jacks.

[ 8 ] G E T T I N G S TA R T E D

www.uniden.com

Page 8
Image 8
Uniden EXI3226 manual Setting up the Phone, Do the following steps