Uniden FP 107 manual Checking the Outgoing Message, Number of Rings, Using the Toll Saver

NOTE

If the FP107 Answer Machine is off, after 15 rings it will automatically switch on and answer the call.

NOTE

The maximum recording capacity is 16 minutes (or 68 recorded messages), or 86 Caller ID records.

Checking the Outgoing Message

To check an outgoing message, press ogm . OGM1 PLAYING appears and the message plays.

If no outgoing message is recorded when you press OGM1, the FP107 announces “You have no announcement one” and sounds four beeps.

Number of Rings	ringer
The FP107 can be set to 2, 4 or 7 rings before it answers the call and plays	select
	2 4 7 TS
your message. The selector is located at the rear of the base unit.

Using the Toll Saver

If the ring select switch is set to TS (toll-saver), the FP107 answers after two rings if you have new messages. If there are no new messages, the FP107 answers after four rings. This gives you time to hang up before the FP107 answers so you can avoid unnecessary long-distance charges.

Setting the FP107 to Answer Calls

To turn on the FP107 and set it to answer calls and record messages, press the

answer on/off once. The FP107 says “Answer on”. ANS ON is displayed, the FP107 plays the outgoing message. The hold answer indicator lights to show that the FP107 is ready to answer calls.

ANS ON

Telephone Answering Machine				Telephone Answering Machine
1 2:22 PM 01/01 NEW 00
					AM	call#
	AM	call#		1 2:22 PM 01/01 NEW 00
RPT OGM 1	ANS ON
-00-	-00-			RPT OGM 1	ANS ONLY
CALLS MESSAGES				OGM1 PLAYING
	Caller ID				Caller ID
delete		dial
				delete		dial
hold / answer	new call	new message		hold / answer	new call	new message
answer on / off	ogm	stop
			play	answer on / off	ogm	stop	play
call diversion	block cid	call waiting		call diversion	block cid	call waiting
1	2	3	4	1	2	3	4

16