Connecting Other Equipment (cont’d)

Arranging the cables

Pass the cable through the notch in the cover. (The cover can also be removed.)

SET UP

About connector covers

Removal

Press down here.

Pull this way.

27 and 32 inch models:

Press down on the lip at the top and pull towards you to remove it.

Installation

37 and 42 inch models:

Press on the two tabs on the right and pull towards you to remove it.

cover tabs

27 and 32 inch models:

Insert the two protrusions at the bottom into the holes on the body, and press in the top until it is locked in place. Next, press in the center section to lock the protrusions on the left and right.

22* Take care not to pinch the cords.

cover tabs

37 and 42 inch models:

Align the three tabs on the left into the holes on the body and press the into the left side until it is locked in place. Next, press the right section to lock in the right side tabs.

Page 22
Image 22
Uniden TL27WRA-W, TL42WRA-B, TL42WRA-W, TL32WRA-B, TL37WRA-W, TL27WRA-B, TL37WRA-B, TL32WRA-W About connector covers, Removal