Initial Settings (continued)

3 When the automatic setup ends, the Program Edit menu appears with the first assigned chan-

nel on screen. Use the

 

/

 

buttons to check the channel numbers and the stations they are

tuned to.

 

 

 

 

 

To edit the scanned channels (to delete CHs which have poor reception), see

page 40. Press

 

 

 

 

the

MENU

button to exit from program edit.

 

The automatic channel setup program starts the first time the TV is turned on.

The automatic channel setup program can also be run from the channel setup menu (page 39). You can also check how channels have been assigned.

If you turn the TV off before automatic channel setup is completed, the initial setup screen will be dis- played again when the TV is next turned on.

Note

When the Initial Setup is completed, the Program Edit screen displays automatically.

If you proceed to Auto Program without connecting an antenna the TV will not be able to tune in

any channels. Make sure an antenna cable is connected and then choose Auto Program from

setup menu (page 39).

SET UP

19

Page 19
Image 19
Uniden TL37WRA-W, TL42WRA-B, TL42WRA-W, TL32WRA-B, TL27WRA-B, TL37WRA-B, TL27WRA-W, TL32WRA-W owner manual Press