Uniden TL37WRA-B, TL42WRA-B, TL42WRA-W, TL32WRA-B, TL37WRA-W Connecting Other Equipment cont’d

Connecting Other Equipment (cont’d)

With the 6 input connections available you can connect a DVD player, Video Camera, TV games machine, VCR player or Digital Tuner.

S Video cable

Video & Audio

Cable

Component Video Cable

Audio Cable

Audio cable

If S-Video jack is installed; S-Video and Audio

output jacks are connected

If there is no S video jack; Video and Audio output

jacks are connected

Component and Audio	SET
output jacks are
connected. D-Terminal
connection can also be	UP
used here instead of
Component connection.
Audio input jacks
are connected

HDMI cable

HDMI cable

DVI to HDMI

cable

Audio cable

Reference

HDMI jacks

are connected

If DVI jack is installed;

HDMI (with DVI to

HDMI cable) and Audio

jacks are connected

Example of connections

•About Equipment with an HDMI or DVI jack

•Use the HDMI (High Definition Multimedia Interface) jack when available as this connection is recommended for best quality picture and audio.

•If there is only a DVI jack then DVI to HDMI cables are commercially available. DVI only supplies a video signal so connect audio cable too. If connecting from DVI source to the HDMI1 jack, connect audio to the Audio3 jack. If connecting to the HDMI2 jack, connect audio to the Audio4 jack. Then go to the “Audio Setup” menu and select audio input to choose Audio3 or Audio4.

•About the Component Video Jack

•Component video signals are also called “color difference signals.” Component video is sent through three cables: one brightness

(luminance or black-and-white component) signal and two color shade (chrominance, or blue: B-Y and red: R-Y) signal. As the brightness and color shade signals are recorded separately from each other on a digital tuner or DVD, component video achieves greater color accuracy (e.g. less color smear) than regular video signals that are obtained by combining the brightness and color shade signals.

21