Troubleshooting
If your UBC 120XLT is not performing properly, try the steps listed below.
PROBLEMSOLUTION
Scanner won'twork.
Check the power connections.
Check the volume and squelch.
Make sure the power switch is turned on.
Improper reception.
Scan won'tstop.
Check the antenna connection.
You may be in a fringe area. Reposition the scanner.
Adjust the Squelch Control.
Check the antenna connection.
It is possible that none of the programmed frequencies are active at the time.
Scan won'tstart.
Search won'tstart.
Keypad won'twork.
Make sure there are some | I | ||
| |||
programmed channels. |
| ||
Adjust | the Squelch | Control. |
|
Adjust | the Squelch | Control. |
|
Check the Keypad | Lock. |
| |
If you still cannot get satisfactory results and want additional
information, or to return the unit for service, please call or write to the Uniden Service Division. The address and
phone number are listed in the Warranty (at the end of this manual).
25
