Search Frequency Skip.
The scanner may stop at certain frequencies during Search that you do not want to hear. You can program up to 10 Skip Frequencies into the UBC 120XL T. When the scanner stops at one of these frequencies during Sec!rch, press @. That frequency is now "memorised" and will be skipped during any Search. The scanner will then search to find other active frequencies.
Caution: If you attempt to lock out more than 10 frequencies, you will overwrite those frequencies already stored in the Search Skip Memory.
Programming With SEARCH
The Search feature enables you to rapidly search for active frequencies within band limits you specify. When an interesting frequency is found, you can store it in a channel using the procedure below.
1.Press~.
2.Use the keypad to select the channel you wish to store a frequency in.
3.Press to accessthatchannel.
4. Use the keypad to enter the lowest | frequency of the | I |
band you wish to search. |
|
5.Press@.
6.Enter the highest frequency of the band you wish to search.
7.Press@.
8.Press ISRCHI.
9.When Search stops on a desired frequency, press
(HOLD)to stay on that frequency. The channel you chose above will be blinking on the display.
BANK 2
~1'4/f./ D [; .D D D D
OIrfA/tl"
SRCH HOLD DLY
10.To store the displayed frequency in that channel, press CD. The channel number on the display stops blinking.
Repeat this procedure to store other frequencies found in the
SEARCHMode.
21
