Uniden UBC 120XLT manual PriorityChannelIndicator- Pappears, Indicates Scan Mode

c.	Memory Bank Numbers	- Each Memory
	Bank consists of 10 channels that you can
	select or deselect during scanning operation,
	using the numeric keypad. When you select a
	Bank, its number appears on the display. When
	you deselect a Bank, its number disappears		I
	from the display. When you press ~ to stop
	scanning, only the Bank of the current channel
	appear~

D.Low Battery Indicator - Appears on the display when the Battery Pack is Iow and needs recharging.

E.Frequency Indicator - 7-digits plus decimal

indicate the frequency being reqeived by the scanner.

F.Mode Indicators - (Only the active mode(s) are displayed during operation.)

DATJ( Indicates DATA SKIP activated

	during SEARCH.
SCN	Indicates SCAN Mode.
SRCH	Indicates SEARCH	e. Flashes

	when in TURB		ARCH Mode.
PRI	ica es PRIORITY SCAN Mode.
HOLD	IndicatesSCAN.HOLD or SEARCH.
	HOLD
DLY	Indicates	DELAY	is activated.
UO	In SCAN	Mode indicates the channel
	shown is "locked		Out".

In SEARCH Mode indicates the

frequency shown is "Locked Out".

WX Indicates WEATHER SCAN Mode.

G. ... Indicatesthekeypadislocked.

H.PriorityChannelIndicator- Pappears

when the scanner stops on a Priority Channel.

2.Press @ to start scanning all programmed channels

that are not locked out. (SCAN moves across the display during scanning.)

3.In SCAN Mode, press ~ to stop scanning. (HOLD appears on the display.) After you stop the scanner, press @ again to resume scanning.

7