Quick Setup Procedure

This example provides steps for configuring an IP telephone via terminal based configuration (User interface) and the web browser based configuration. Both UIP300 terminal interface and the web browser are used when modifying the information for the operation of UIP300.

This example assumes that UIP300 is connected to a Televantage® system.

The IP terminal must be configured, before the web browser is configured.

Terminal Configuration using UIP300

To access the Phone Configuration Menu and set up a telephone configuration:

1.Press Menu.

2.Use the or keys to access the Configuration menu, then press Select.

Setup Menu:

3/4

Configuration

3.Use the or keys to access the Network Configuration menu, then press Select.

Configuration Menu: 2/3

Network Configuration

4. When prompted to enter “Password” enter the password, then press Select.

Enter Password

******

15

Page 17
Image 17
Uniden manual Quick Setup Procedure, Terminal Configuration using UIP300, Setup Menu Configuration, Enter Password