Control and Functions of the Telephone
To make telephone operations easier and to avoid user confusion, many required functions are already programmed into the fixed function keys. There are 15 fixed function keys in UIP300.
•Speaker – Turn speakerphone or headset on/off
•Mute – Enable/disable the Mute function
•Hold – Hold the called party
•Transfer – Generate a DTMF String which the user can set
•Conference – Generate a DTMF String which the user can set
•Redial – Generate a DTMF String which the user can set / Enter “,” , pause digit for phone book or speed dial numbers.
•Menu – Display the main Setup menu if in the Standby screen, or return to Standby screen if in any menu or submenu screen
•Select – Confirm a particular choice inside any menu screen
•Cancel/Del
◊Works as delete key when there is one or more character(s)
The character string may contain one or more digits as part of the string.
◊Works as backspace key when there is one or more digit(s)
◊Deletes the entire character string or digit(s) if this key is pressed and held for two seconds or longer.
◊Cancels the operation in the setup menu and returns to the previous menu.
•Navigation ▲ (up) and ▼ (down) Keys – Primarily used to navigate up or down the Setup Menu.
•Volume ▲ (up) and ▼ (down) Keys – Used for adjusting the volume louder or softer.
•Telephone Line Keys – Used to select telephone line 1 or 2.
Function Keys
There are five user programmable function keys in UIP300. Each can be programmed to one of the three available functions – Speed Dial, Do Not Disturb (DND), and Voice Mail.
LED Status
There are 10 LEDs in UIP300. Four LEDs are located adjacent to the four fixed keys. Lines 1 and 2, Speaker and Mute show the status of the function in each key. The Message Waiting Indication is dedicated to notify the user for the arrival of an incoming call or a new voice mail. Table
•Message Waiting Indication with activation of voice mail function in the system.
10
