Voice Mail

UIP300 supports voice mail service. In order to access this feature, the user’s IP terminal must be connected to the existing voice mail system. When a new message arrives, the Message Waiting Indication turns on to notify the user that a new voice mail message is waiting.

To access voice mail:

Press the Function key assigned for voice mail or dial the voice mail number manually. Refer to “Function Key” on page 42 for instructions for assigning a function key to access voice mail.

The user is connected to the voice mail system and prompted by instructions to access the their mail box. The Message Waiting Indication remains lit solid until UIP300 receives “No Message” indication from the voice mail system.

Redial

Redial records are retained in the gateway system and will be invoked by sending a pre-assigned DTMF String to the system when the Redial key is pressed.

Mute

Mute can be used during a conversation. To activate mute:

Press the Mute key.

The user’s voice is muted, however, the user can still hear the other parties participating in the call. The Mute LED goes on to remind the user that their voice is being muted.

To deactivate mute:

Press the Mute key.

Mute is disabled, the Mute LED goes off and the user’s voice can now be heard.

Hold

To place a call on hold during a conversation:

Press the Hold key.

The LED of the line that is put on hold blinks continuously.

To resume the call:

Press the line key for the party on hold.

The Hold indication message disappears and the line LED changes from blinking to a solid-on indication.

Music on Hold is sent to the holding party from the gateway. If the holding party disconnects, the telephone stops Music on Hold and the telephone LCD shows “Call Disconnected”.

30

Page 32
Image 32
Uniden UIP300 manual Voice Mail, Redial, Mute, Hold