Uniden UND1685 manual Using the Answering System, Answering System Options Ans. Setup

reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.

Using the Answering System

Answering System Options (Ans. Setup)

You can set or change the answering system options from any station. Just open the menu and select Ans. Setup. Select one of the menu options:

Menu Option	What it does
Security Code	Enter a 2-digit PIN so you can access your answering system
	from any touch-tone phone (see page 18).
	Set the number of rings (2, 4, or 6) before the system answers.
Ring Time	If you call in remotely to check your messages, Toll Saver makes
	the system answer after 2 rings if you have new messages or
	after 4 rings if not.
	Set the amount of time (1 or 4 minutes) callers have to leave a
Record Time	message. Choose Announce Only if you don’t want the system
	to let callers leave a message.
Message Alert	Have the base beep every 15 seconds when you have a new
	message. The alert stops after you listen to all your new
	messages or if you press any base key.
Ans. Language	Change the language of the system’s voice prompts.
Call Screen	Turn on the Call Screen feature (see page 17).
Ans. On/Off	Turn your answering system on or off.
	You can also press ANS ON/OFF on the base.
Record Greeting	Record an outgoing message or greeting (see page 16).
Greeting	Switch greetings or delete your greeting (see below).
Options

Recording the Outgoing Message

Your personal outgoing message or greeting can be from 2 to 30 seconds long. If you don’t record a greeting, the system uses the pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone.

English - 15