English - 21

Adapter and Battery Infor-

mation

AC Adapter (Base and Charger)
Part number PS-0035
Input voltage 120V AC, 60 Hz
Output voltage 8V AC @ 300mA
xUse only the supplied AC adapters.
xUse the proper adapter for the base & any
chargers.
xDo not place the unit in direc t sunlight or
subject it to high temperature s.
Battery pack (with normal use)
Part number BT-1021
Capacity 300mAh, 2.4V DC
Talk time about 7 hours
Standby time about 7 day s
Battery life about 1 ye ar
xReplace the battery when th e talk or
standby time becomes notice ably reduced.
For replacements, call the Pa rts Depart-
ment (see the front cover).
xWhen the battery gets low, the ha ndset
beeps and shows a low battery aler t;
recharge the battery.

Rechargeable Battery Warning

xis equipment contains a recha rgeable
Nickel-Metal-Hydride (Ni-MH) bat tery.
xNickel is a chemical known to t he state of
California to cause ca ncer.
xDo not short-circuit the batter y.
xe batteries in this equipme nt may
explode if disposed of in a re .
xDo not charge the batteries in a ny charger
other than the one specie d in the owner's
manual. Using another cha rger may dam-
age the battery or cause it to ex plode.
xAs part of our commitment to prote cting
our environment and conserv ing natural
resources, Uniden voluntari ly participate s
in an RBRC® industry
program to collect and
recycle used Ni-MH
batteries within the
United States. Please
call 1-800-8-BATTERY
for information on Ni-
MH battery recycling in
your area. (RBRC® is a
registered trademark of th e Rechargeable
Battery Recycling Cor poration.)

Rechargeable batteries must be

recycled or disposed of properl y.

Warning! The cords on this product

and/or accessories contain lead,

a chemical known to the state of

California to cause birth defec ts

or other reproductive harm. Wash

hands after handling.

Uniden works to reduce lead

content in our products &

accessories.

Compliance Information

FCC Part 68 Information

is equipment complies with Pa rt 68 of
the FCC rules and the requi rements ad-
opted by the ACTA. On the bottom of this
equipment is a label that contain s, among
other information, a product ident ier
in the format US: AAAEQ## TXXXX . If
requested, this number must b e provided
to the phone company.
An applicable Universal Ser vice Order
Codes (USOC) certicati on for the jacks
used in this equipment is provid ed (i.e.,
RJ11C) in the packaging with each pie ce
of approved terminal equipment. A plu g
and jack used to connect thi s equipment
to the premises wiring a nd telephone
network must comply with the appli cable
FCC Part 68 rules and requi rements
adopted by the ACTA. A compliant tele-
phone cord and modular plug is provided
with this product. It is desig ned to be
connected to a compatible modula r jack
that is also compliant. See i nstallat ion
instructions for detai ls.