When the Message Counter LED flashes, you have unread new messages.
Switching the Answer Machine On/Off
1.To turn the Answering System on, press answer.
A tone sounds, and the current outgoing message plays on the Base Unit speaker and the Message Counter LED turns on. A second tone sounds to indicate the unit is ready to answer calls.
repeat ogm memo skip
▼ ▼ | ▼ ▼ |
pin | clock answer page |
2.To turn the Answering System off, press answer again. A tone sounds and the Message Counter LED turns off.
Setting the Clock
The clock in your XSA660/650 Answering System starts when power is applied to the Base Unit. Follow these steps to set the clock to the correct time.
1.Press and hold the clock button until a beep tone is heard and the day is announced.
mic
▼
repeat ogm memo skip
▼ ▼ | ▼ ▼ |
pin | clock answer page |
2.Press skip or repeat until the correct day is announced.
3.Press clock again. Press skip or repeat until the correct hour is announced.
4.Press clock again. Press skip or repeat until the correct minute is announced.
5.Press clock again. Press skip or repeat to select AM [ - A ] or PM [ - P ] .
6.Press clock to return to Standby.
The selected time and day is announced For example, to set Tuesday at 3.10AM:
Press and hold clock then “Sunday” will be announced.
mic
▼
Day of the Week | Display |
Sunday | - 0 |
Monday | - I |
Tuesday | - 2 |
Wednesday | - 3 |
Thursday | - 4 |
Friday | - 5 |
Saturday | - 6 |
Press skip x 2 times, “Tuesday”, will be announced. Press clock then skip 4 times “three, will be announced. Press clock then skip 11 times “ten”, will be announced. Press clock then skip 1 time “AM”, will be announced.
Press clock to finish, the complete time and day will be announced.
20
