Use only the AC adaptor that came with the phone.
Use only the AC adaptor that came with the phone.
8
DESK OR TABLETOP INSTALLATION
1. Plug the AC adaptor cord into the 9V DC input jack on the base.
2. Wrap the AC adaptor cord inside the molded
1 3
2
5
4
Line in
AC | From | |
Adaptor | ||
Telephone | ||
| ||
| Jack |
3.Plug one end of the long telephone cord into the TEL LINE jack on the base.
4.Plug the other end of the telephone cord into the telephone wall jack. (remember, the phone must be fully charged before you can use it.)
5.Plug the AC adaptor into a standard 240V AC wall outlet.
6.Fully extend the antenna on the base.
Wall Installation
Setting the handset Retainer for Wall mounting
1. Remove the handset retainer on the by base sliding it upward.
2. Rotate the retainer 180˚ and flip over so the tab is facing up.
3. Slide the retainer back onto the base.