The following label is called “Dump Settings” label. Before you scan the label, please open a text editor application(such like, Notepad, Word, etc..) Scan the following label, the settings of the scanner will dump to the screen as one or several ASCII string(s). Use any barcode printing software, select Code 39 symbology, and use the string(s) to generate bar code labels. You use this batch setup labels to duplicate setting to the other scanners.
Dump Settings
If you have settings as the following:
*Device Type is “Keybaordless Wedge”.
*Do not send the check digit of
*Define Preamble as “<F1>”.
*Define Postamble as “<Tab>”.
*Define Label 0 as “START”.
When dumping settings on a PC/AT, you have the following strings:
...I800C06D51DJ8 08080A0O7C005354 415254.
Print into Code 39 bar code labels:
. . . I 8 0 0 C 0 6 D5 1 DJ 8
0 8 0 8 0 A0 O7 C 0 0 5 3 5 4
415254.
By scanning the labels from top to bottom sequentially, you may duplicate the other scanners with the same settings.
Page 19
