ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Virtual Private Networking Using IPsec 5-5
v1.2, June 2008
1. Select Gateway as your VPN tunnel connection.
The wizard needs to know whether you are planning to connect to a remote gateway or setting
up the connection for a remote client PC to establish a secure connection to this device.
2. Create a Connection Name. Enter an appropriate name for the connection. This name is not
supplied to the remote VPN endpoint. It is used to help you manage the VPN settings.
3. Enter a Pre-shared Key. The key must be entered both here and on the remote VPN gateway,
or the remote VPN client. This key should be minimum of 8 characters and should not exceed
49 characters. This method does not require using a CA (Certificate Authority).
4. Check the radio button for the WAN interface (WAN1 or WAN2) tha will act as this endpoint
of the VPN tunnel.
5. Enter the Remote WAN IP Address or Internet Name of the gateway to which you want to
connect.
Figure 5-4