ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
6-14 Virtual Private Networking Using SSL Connections
v1.2, June 2008
3. In the Service pull-down menu, select the type of service to which the resource will apply:
either VPN Tunnel or Port Forwarding.
4. Click Add.
The “Operation Successful” message appears at the top of the tab, and the newly-added
resource name appears on the List of Resources table.
5. Adjacent to the new resource, click the Edit button. The Add Resource Addresses screen
displays.
6. From the Object Type pull-down menu, select either IP Address or IP Network:
• If you selected IP Address, enter an IP address or fully qualified domain name in the IP
Address/Name field.
• If you selected IP Network, enter the IP network address in the Network Address field.
Enter the mask length in the Mask Length (0-31) field.
7. Enter the Port Range or Port Number for the IP Address or IP Network you selected.
8. Click Apply to add the IP address or IP network to the resource. The new configuration
appears in the Defined Resource Addresses table, as shown in Figure6-7.
Figure 6-7