ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Monitoring System Performance 9-9
v1.2, June 2008
Monitoring the Status of WAN Ports
You can monitor the status of both of the WAN connections, the Dynamic DNS Server
connections, and the DHCP Server connections. To monitor the status of the WAN ports:
1. Select Network Configuration > WAN Settings from the main menu. The WAN1 ISP Settings
screen is displayed.
2. Click the WAN Status link in the upper right-hand section of the screen. The Connection
Status popup window displays a status report on the WAN1 port.
3. To get a status report on the WAN2 port, click the WAN2 ISP Settings tab, and then click the
WAN Status link.
WAN1 Configuration Indicates whether the WAN Mode is Single, Dual, or Rollover, and whether the
WAN State is UP or DOWN. It also is displayed if:
• NAT is Enabled or Disabled.
• Connection Type: DHCP enabled or disabled.
• Connection State
• WAN IP Address
• Subnet Mask
• Gateway Address
• Primary and Secondary DNS Server Addresses
• MAC Address.
WAN2 Configuration Displays the same details as for WAN1 Configuration.
Note: The Router Status screen displays current settings and statistics for your VPN
firewall. As this information is read-only, any changes must be made on other
pages.
Item Description