ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Firewall Protection and Content Filtering 4-9
v1.2, June 2008
To change the Default Outbound Policy, follow these steps:
1. Click the LAN WAN Rules tab, shown in Figure4-1.
2. Change the Default Outbound Policy by choosing Block Always from the drop-down menu.
3. Click Apply.
Creating a LAN WAN Outbound Services RuleAn outbound rule will block or allow the selected application from an internal IP LAN address to
an external WAN IP address according to the schedule created in the Schedule menu.
You can also tailor these rules to your specific needs (see “Administrator Tips” on page4-33).
To create a new outbound service rule in the LAN WAN Rules tab:
Note: This feature is for Advanced Administrators only! Incorrect configuration will
cause serious problems.