Univex FVS336G - page 51

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
LAN Configuration 3-3
v1.2, June 2008
.
2. In the LAN TCP/IP Setup section, configure the following settings:
•IP Address. The LAN address of your VPN firewall (factory default: 192.168.1.1).
•IP Subnet Mask. The subnet mask specifies the network number portion of an IP address.
Your VPN firewall will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use 255.255.255.0 as the subnet
mask.
Figure 3-1
Note: If you change the LAN IP address of the firewall while connected through the
browser, you will be disconnected. You must then open a new connection to
the new IP address and log in again. For example, if you change the default IP
address 192.168.1.1 to 10.0.0.1, you must now enter https://10.0.0.1 in your
browser to reconnect to the Web Configuration Manager.