A-1
v1.2, June 2008
Appendix ADefault Settings and Technical Specifications
You can use the reset button located on the rear panel to reset all settings to their factory defaults.
This is called a hard reset.
• To perform a hard reset, press and hold the reset button for approximately 10 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table A -1 below.
• Pressing the reset button for a shorter period of time will simply cause your device to reboot.
TableA-1. VPN firewall Default Configuration Settings
Feature Default Behavior
Router Login
User Login URL https://192.168.1.1
User Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Use Default address
WAN MTU Size 1500
Port Speed AutoSense
Local Network (LAN)
Lan IP Address 192.168 .1.1
Subnet Mask 255.255.255.0
RIP Direction None
RIP Version Disabled
RIP Authentication Disabled
DHCP Server Enabled
DHCP Starting IP Address 192.168.1.2
DHCP Ending IP Address 192.168.1.100
Management