Univex IT Series 4.2MAIN MENU, Model 5100-02-ITCombustible Gas Sensor Module, Page, Master Menu

Model 5100-02-IT Combustible Gas Sensor Module

4.2MAIN MENU

Table 4-1 describes the primary human-machine interface operation.

Key		Function	Display	Description	Reference
M	E	Mode		Switch [M]
S	T
M	E	Enter		Switch [E]
S T
M	E	Up		Switch [▲] Previous Menu
S	T
M	E	Down		Switch [▼] Next Menu
S	T
			5100-02	First screen at power up-model
		1.Xxa	VX.Xxx	Second screen at power up-version
			Warm.XXX	Third screen at start up-warm up
			0%LEL	Normal condition - default display
M	E	Mode	ALMRSET:	Mode Function -Alarms Acknowledge
S	T
			SSSSSSSS	Banner: Use <M> switch for different menu items. Select <E> to
				enter menu item.
			0%LEL	Default Display
M	E	Mode	ALMRSET:	Mode Function - Alarms Reset
S	T
M	E	Mode	CALIB:	Mode Function - Calibrate	Table 5-1
S	T
M	E	Mode	SETUP:	Mode Function - Set Point Adjustments	Table 4-3
S	T
M	E	Mode	MAINT:	Mode Function - Maintenance	Table 4-4
S	T
M	E	Mode	EXIT-?	Exit Mode
S	T
M	E	Enter	0%LEL	Apply Selected Mode (Exit)
S T
			0%LEL	Default Display
				Table 4-1
				Master Menu

Table 4-2 describes the operational display values of the human-machine interface system.

Display

Description

STARTING		Warm-up at start-up
##%LEL		Concentration
L ##%LEL		Low Alarm
H ##%LEL		High Alarm
HIGH		>100% Full Scale
NO SENSR		Sensor Failure
C ##%LEL		Calibration Mode
ACK		Acknowledged Function
	Table 4-2
	Operation Display Values

ID THE DISPLAY SHOWS “START” INSTEAD OF “STARTING, THE MODULE MUST BE CALIBRATED BEFORE USING IT.

Page: 16