Univex IT Series Function, Display, Description, Reference, Relays Set Point Adjustment Example

Model 5100-02-IT Combustible Gas Sensor Module

Key		Function	Display	Description	Reference
			--0%LEL-	Default Display
M	E	Mode	ALMRSET:	Mode Function - Alarm Reset
S	T
M	E	Mode	CALIB:--	Mode Function - Calibrate
S	T
M	E	Mode	SETUP:---	Mode Function - Set Point Adjustments
S	T
M	E	Enter	Alarms	S.P. Function - Alarm Adjust	* A Below
S	T
M	E	Down	Relays	S.P. Function - Relays Adjust	* B Below
S	T
M	E	Down	GasFactr	S.P. Function - Gas Factor Adjust	* C pg. 19
S	T
M	E	Down	4-20mA	S.P. Function - 4-20 mA Adjust	* D pg. 19
S	T
M	E	Down	RS-485	S.P. Function - RS-485/Sentry Output Adjust	* E pg. 19
S	T
			High Alarm Set Point Adjustment Example
M	E	Enter	H.Alarm	S.P. Function - High Alarm Adjust	*A
S	T
M	E	Enter	HASP:60-	High Alarm Set Point: current = 60
S	T
				Use S or T keys to adjust to new set point
M	E	Down (x5)	HASP:55-	High Alarm Set Point: new = 55
S	T
M	E	Enter	ACK	Momentary Acknowledge of new Set Point
S	T
			H.Alarm	S.P. Function - High Alarm Adjust
				Relays Set Point Adjustment Example
M	E	Enter	H. Relay	S.P. Function - High Alarm Relay Adjust	*B
S	T
M	E	Down	L.Relay	S.P. Function - Low Alarm Relay Adjust
S	T
M	E	Enter	Latch	Use S or T keys to adjust to new relay action
S	T			(Latch, Sentry, NonLatc) * indicates current
M	E	Down	Sentry	NOTE: Sentry indicates that Sentry controls relay
S	T			action and not the IT Sensor Module
M	E	Down	*Sentry	High Alarm Relay set to Sentry
S	T
				Table 4-3A Set-Up Configuration

Page: 18