| Model | |
6.2 | ENCLOSURE REPLACEMENT | 23 |
6.3 | TRANSMITTER REPLACEMENT | 24 |
6.4 | SENSOR REPLACEMENT | 24 |
6.5 | INSTALLATION INSPECTION | 24 |
| CONTROLLER INSTALLATION | 24 |
| CABLING INSTALLATION | 24 |
| SENSOR MODULE INSTALLATION | 24 |
| MOISTURE TRAPS AND RAINSHIELDS | 25 |
| STANDARD VOLTAGES | 25 |
| INSPECTION AND TROUBLESHOOTING GUIDE | 25 |
| IF MODULE DOES NOT RESPOND TO GAS | 25 |
| IF THE MODULE DOES NOT COME OUT OF WARM UP | 25 |
| If the module does not display the correct %LEL | 25 |
| If the display shows ‘NO SENSR’ | 25 |
| IF THE MODULE SHOWS “***Calibration Required***” | 25 |
| IF THE MODULE SHOWS “***UNCALIB***” | 25 |
| If the display shows ‘H’ (OR l) THEN THE LOCAL HIGH OR LOW ALARM IS ACTIVE | 25 |
| If the display shows ‘w’ – radio freQuency INTERFERENCE | 25 |
| If the display shows “C” – calibration mode | 25 |
| other error messages – call factory | 25 |
7. | APPENDICES | 26 |
7.1 | APPENDIX A: SPECIFICATIONS | 26 |
7.2 | APPENDIX B: MODEL NUMBERS & PARTS LIST | 27 |
7.3 | APPENDIX C: LIMITED WARRANTY | 28 |
7.4 | APPENDIX D: REMOTE SENSOR/DISPLAY DRAWING | 29 |
7.5 | APPENDIX E: AUXILIARY RELAY ASSEMBLY | 30 |
7.6 | APPENDIX F: AUXILIARY CONNECTION ASSEMBLY | 31 |
7.7APPENDIX G: AUXILIARY
7.8 | APPENDIX H: MODBUS MEMORY MAP | 34 |
7.9 | APPENDIX I: COMBUSTIBLE GAS SCALING FACTORS | 35 |
7.10 APPENDIX J: MENU KEY FOR | ||
Contents
