UTStarcom PPC 6700 manual Transcriber Gestures, To write using Transcriber, To edit text

To write using Transcriber

1.In a program, position the cursor where you want text to appear.

2.Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen.

To enter punctuation and symbols

Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text.

• In a program, tap		on the Transcriber toolbar. The keyboard remains visible until
you tap the button again.
Tips	To reposition the keyboard, tap and hold the title bar, then drag to the desired location.
	When no text is selected, you can also open the keyboard by doing the gesture.

To edit text

1.In a program, draw a line across the text you want to edit.

2.After you lift the stylus from the screen, the line will disappear and the selected text will be highlighted.

3.Do either of the following:

•Rewrite the text.

•Use gestures to capitalize letters, insert a space, and so on. For information about using gestures, see “Transcriber Gestures” in this chapter.

Transcriber Gestures

Use quick strokes of the stylus to edit your text or to insert returns, spaces, or tabs.

Tip You can also use the Enter, Space, and Backspace buttons on the Transcriber toolbar.

26 Entering and Searching Information