UTStarcom PPC 6700 manual Recording a Note, To create a voice note

4.A selection box labeled Drawing appears around your drawing.

5.When finished, tap OK to return to the note list.

Note	To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly.
	When you lift the stylus, the drawing is selected.

2.8 Recording a Note

You can create a stand-alone recording (voice note) or you can add a recording to a note. For more information about creating, changing, or saving Notes, see “Notes” in Chapter 7.

To create a voice note

1.Tap Start > Programs > Notes.

2.Do one of the following:

•To create a stand-alone recording, record from the note list.

•To add a recording to a note, create or open a note.

3.If you do not see the Recording toolbar, tap Menu > View Recording Toolbar.

4.Tap the record icon ( ) to begin recording.

5.Hold your device’s microphone near your mouth or other source of sound.

6.Tap the stop icon ( ) when finished recording.

7.If you are adding a recording to a note, tap OK to return to the note list when finished.

8.If you are recording in an open note, an icon will appear in the note.

9.If you are creating a stand-alone recording, the recording will appear in the note list.

Tip To quickly create a recording, press the VOICE RECORD button ( ) on the side of your device. When you hear the beep, begin your recording. Release the button when you are finished.

Entering and Searching Information 33