Valor Auto Companion Inc 739DVP, 739DVN owner manual Appliance Preparation

Appliance Preparation

CAUTION: Do not abuse the appliance’s glass by striking, slamming or similar trauma. Do not use the appliance with the window removed, glass panel cracked or broken. Only use glass approved for use with this heater. Do not use substitute materials. Replacement of the panel should only be carried out by a licensed qualified service person.

Do not remove the window when the appliance is hot. Not only is it dangerous but it could cause damage to the gasket.

9.1 Window Removal

•Remove the bottom center spring-loaded bolt.

•Turn the 5 remaining spring-loaded bolts 90 degrees to release the window from the firebox.

•Carefully lift the window away and put aside in a safe location to avoid damage.

•To reinstall, follow the instructions given in the section Window Refitting on page 21.

Spring-loaded bolts

2

1

9.2 Ignition Spark Check

The pilot burner and electrode unit are at the left end of the burner.

Push in the lighting knob and turn it counter-clockwise through the “IGN” position to “PILOT”. A spark should flash across from the pilot electrode to the pilot burner shield as shown below.

Thermostat Knob Gas Control Knob

15