Valor Auto Companion Inc 739DVP, 739DVN Clearances, Existing Fireplace Masonry or Factory-Built

Clearances

6.1 Existing Fireplace (Masonry or Factory-Built)

The model 739 is intended for installation into masonry or listed factory-built fireplaces. Masonry fireplaces must be built according to the requirements of the standards for chimneys, fireplaces, vents and solid-fuel burning appliances, NFPA 211 (Latest Edition) or the applicable national, provincial, state or local codes. The section 6.2 shows the minimum install dimensions for the model 739.

5”5”

Distance from unit (engine) to combustible wall

Note: The model 739 is certified without requiring a hearth projection, although local codes may require a minimum hearth projection.

X

Check that masonry step does not interfere with install dimensions or vent pipe.

If mantel is combustible see section 6.2 for allowable clearances.

Minimum width of fireplace opening at front = 28”

X = 12-5/8” for Contoured Outer Trims

X = 12 ” for Deluxe Outer Trims

Y = 20”

Y

9