Vanguard Heating SBVBP(C) Owner’S Manual, Product Identification, Local Codes, Product Features

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Cast Iron

Stove Body

Log Set

	LO HI	OFFLO
		PI
		T
		ON
	Control Valve
	Piezo Ignitor
Vent		Cast Iron
Opening		Stove Body

LOCAL CODES

Install and use stove and burner system with care. Follow all local codes. In the absence to local codes, use the current National Fuel Gas Code ANS Z223.1, also known as NFPA 54* (USA) or the current CAN/CGA- B149[.1 or .2] Installation Codes (Canada).

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

PRODUCT

FEATURES

OPERATION

This B-vent cast iron stove with burner system is clean burning and vents vertically. Heat is generated by both realistic flames and glowing embers. When used without the blower accessory, the stove with burner system requires no electricity making it ideal for emergency backup heat.

Rear

ON/OFF Cover

Switch

(Other Side)

Pilot

Blower withAssy Adjustment

Knob (Optional Installation)

Burner

Glass Door

Assy

Lava Rock

PIEZO IGNITOR

This burner system has a piezo ignitor. This system requires no matches, batteries, or other sources to light burner system.

Grate Assembly Glowing Embers

Figure 1 - Vanguard B-Vent Burner System Shown Installed in Approved Vanguard Cast Iron Stove Body Models SCIVFC Series and PSCIVFC Series Only

106828 3 For more information, visit www.desatech.com