®
DIRECT-VENT FIREPLACE
FIREPLACE INSTALLATION
Continued
REMOVING/REPLACING GLASS DOOR
You must remove glass door to install op- tional brick liners, logs, lava rock, and em- ber material.
CAUTION: Do not operate this fireplace with a broken glass door panel. Do not operate this fire- place without the glass door panel securely in place. For replace- ment part information see Re- placement Parts, page 35.
1.Remove the upper louver panel by lift- ing upward and out (see Figure 46).
2.Remove the screws from the three tabs at the top of the glass door while hold- ing door securely keeping it from fall- ing forward.
3.Grasp door by both sides and ease it upward off of the lower bracket (see Figure 47).
4.To replace glass door, follow the above instructions in reverse.
Screw
Glass Door
Assembly
Lower Bracket for
Glass Door Assembly
Figure 47 - Removing/Replacing Glass Door
Top Louver
Panel
Figure 46 - Removing Top Louver Panel
22 | 106497 |
