VeriFone Omni 37xx manual Install/Replace, Msam Cards, To change or install SAMs

TERMINAL SETUP

Install/Replace MSAM Cards

NOTE

7Close the cover by gently pressing directly on the paper roll cover until it clicks shut. Allow a small amount of paper to extend outside the cover (see Figure 8).

To prevent damage to the print roller on the paper roll cover, always close the cover by gently pressing down on the paper roll cover.

		Figure 8	Closing Paper Roll Cover
		For paper ordering information, refer to the Accessories and Documentation
		section.
Install/Replace		When you first receive your Omni 37xx terminal, you may need to install one or
MSAM Cards		more micromodule-size security access module (MSAM) cards, or you may need
		to replace old cards with new ones.
	CAUTION	Observe standard precautions for handling electrostatically sensitive devices.
		Electrostatic discharges can damage this equipment. VeriFone recommends using
		a grounded anti-static wrist strap.

To change or install SAMs

1Remove the power cord from the back of the terminal.

2Place the terminal upside-down on a soft, clean surface to protect the lens from scratches.

3Remove the locking screw and remove the MSAM compartment door (see Figure 9).

16OMNI 37XX INSTALLATION GUIDE