VeriFone Omni 37xx manual Msam Compartment Door and Locking Screw

TERMINAL SETUP

Install/Replace MSAM Cards

MSAM

LOCKING SCREWCOMPARTMENT DOOR

Figure 9 MSAM Compartment Door and Locking Screw

4The MSAM cardholders are now accessible. Each cardholder consists of a hinged tilt-up cover attached to a connector base.

5To unlock a cardholder, slide its locking plate to the unlocked position, shown by the OPEN arrow (see Figure 10).

Figure 10 MSAM Cardholder Close-Up

6Open the cardholder by pivoting the cover on its hinges away from its connector base (see Figure 11).

OPENING THE	REMOVING A	INSTALLING A	CLOSING THE
CARDHOLDER	SAM CARD	SAM CARD	CARDHOLDER

Figure 11 Using an MSAM Cardholder

7Remove any previously-installed MSAM card by sliding the card from the cover.

8Install an MSAM card by aligning the card and carefully sliding it within the guides on the cover until it is fully inserted.

NOTE Before inserting the MSAM card, position it as shown in Figure 11, with the card’s gold contacts facing the smart car reader end of the terminal. The cardholder connector base has a set of contacts and a notch post on one corner to ensure the MSAM card is positioned correctly when the cover is closed. The MSAM card has a notch on one corner to ensure that it fits into the connector base in only one way.

OMNI 37XX INSTALLATION GUIDE 17