Page 21
Fig.20
Fig.21
Care & Maintenance
Maintenance
BURNERADJUSTMENT
NOTE:
NOTE:
Itmay be necessary to adjust the burners periodically,
tocompensate for variables in gas characteristics. If younotice
thatthe burner flame pattern is ir regular (see Figs.9a, 9b & 9c),
itmay be necessary to adjust the air shutter opening at the front
of the venturi tubes.
If burners are removed for cleaning or adjustment, always
confirmthat they have been reinstalled correctly over the valve
outlets(see Fig. 21). The valves should extend into the burner
venturis1/4" minimum.
Similaradjustment can be made to Rotisserie and/or
SideBurners, if soequipped.
The shutters are accessible under the control panel at the
frontof theGrill (see Fig.20).
Use a screwdriver to loosen the locking screws.Open the
shutter just enough to achievethe desired soft, blue flames.
Makeadjustments in small increments and allow the burner
to come up to operating temperature (10 min.) before
makingfurther adjustments. Loosenthe
lockingscrew
VenturiTube
1/4”
Valve
Outlet
Turnshutter
clockwiseto open